Covered trench or bunker (70% moisture) typically loses 16–23% (MU G4591 Table 5, from Holmes & Muck 2000). The midpoint is the default.

Remaining silage

289.8 wet tons out

Dry matter in126.0 t
Storage loss24.6 t DM
Dry matter out101.4 t
Moisture adjustment0.0 t wet
Wet tons remaining289.8 t

How storage shrink is applied

Storage loss is taken from the dry matter, not the wet weight. Remaining dry-matter tons are then divided by the dry-matter fraction at feedout to get wet tons:

wet tons out = wet tons in × (DM in ÷ 100) × (1 − loss ÷ 100) ÷ (DM out ÷ 100)

The defaults are midpoints of the total-loss ranges in MU G4591 Table 5. If you have a packing-density estimate, the packing calculator reports Ruppel's 180-day loss, which you can type in here instead.

Frequently asked questions

How much shrink should I expect?
It depends on the structure and the pack. MU G4591 Table 5 (Holmes and Muck 2000) puts well-managed bags around 9–14%, a covered bunker around 16–23% at 70% moisture, a covered pile 17–27%, and an uncovered pile much higher. A gas-tight tower can be under 12%.
Is this the same as grain moisture shrink?
No. Grain shrink is mostly water leaving as the crop is dried. Silage shrink is dry matter lost to seepage, fermentation gases, surface spoilage and feedout. Moisture can also change in the pile. For grain moisture shrink, use grainshrink.com.

Other calculators